OKM Delta Ranger DR-A01, Руководство пользователя

Страница: 22 / 32

42 / 62 43 / 62
5.9.2 Measurement Screen
Enable the laser pointer for 5 s as an additional tool for aiming at the target object.
You may correct the Point Cloud position via Settings – see
4.6 Set Crosshairs Po-
sition on page 17 .
Change Point Cloud Opacity: Adjust the transparency in 3 levels to see target objects
in the background more clearly. The default is set to an intermediate value.
Exit Thermo Stream and returning to the main menu.
5.9 THERMO STREAM
Use the operating mode Thermo Stream for initial explorations of unknown locations to detect
structures such as hidden rooms, caves and tunnels behind walls and in the underground
based on noticeable surface temperature deviations.
Make sure you have connected the Thermo Probe (T).
This operating mode allows horizontal (short-range) and vertical
probe orientation.
5.9.1 Perform Measurement
1 2
Start the operating mode Thermo Stream by
tapping on the option in the App main menu.
Point the probe at a referential target object
(e.g. a wall).
Check the point cloud position by tapping on
the laser pointer icon .
To correct the position see
4.6 Set Crosshairs Position on page 17 .
3 4
Move the probe freely and point it on any
target object or area that you want to
measure.
The temperature of the target object is
indicated by
• the colored point cloud,
• the pointer on the temperature scale,
• as measured value.