OKM BODY SCREENER, Руководство пользователя

Страница: 7 / 32

2 Notes on Safety and Troubleshooting
In order to avoid damages to the device, health impairments of persons and measurement errors,
please follow the instructions below.
2.1 Location and Setup of the Body Screener
•
Do not place near magnetic fields or iron carriers.
•
Ensure that the Body Screener TM is positioned correctly (installation and alignment by
trained service personnel recommended).
•
Do not place any objects in the area of the measuring head in order to avoid damage to the
device/motor during the measuring process.
•
Only use the supplied power supply unit – do not use extension cables or cable drums.
•
Position the floor mat according to the recommendations in section 8.1 “Floor Mat as
Positioning Support“.
2.2 Before and During the Measuring Process
•
Calibration/zero adjustment is recommended before each measurement in order to avoid
incorrect representations of the measurement results (in case of incorrect calibration, half
of the person may be shown in blue).
•
Persons (standing or running) who are not involved should keep at least 2 m distance from
the Body Screener
TM .
•
Smartphones, watches, keys, belts, wallets (chip cards, coins) and other metallic
accessories with and without radio technology should keep at least 3 m distance from the
Body Screener
TM .
•
Use of mobile phone not in immediate vicinity (telephone, messaging, WhatsApp, internet
etc.), activation of flight mode is recommended.
•
Do not touch the sensor unit to avoid falsification of the measurement.
•
Do not touch, push or pull the sensor unit to prevent damage to the device/motor.
2.3 Maintenance of the Body Screener
•
Unplug the power supply before cleaning or dismantling the Body Screener TM
•
Installation, maintenance and service recommended by qualified personnel.
Please find a print version at “NOTES“ on page 33.
7