O
KLAHOMA
S
OUND
C
ORPORATION
INTRODUCTION
Congratulations!
You ar
e now the o
wner of
the unique Dual Hand-Held W
ireless
Microphone System fr
om Oklahoma Sound
Corp.
The two wir
eless microphones can be used
at the same time,Kar
aokee-style or f
or
speaker/audience par
ticipation.Just f
ollow
the instructions in this booklet and y
ou are
ready to go.
This state-of-the-art micr
ophone system
should pr
ovide tr
ouble free usage f
or year
s
to come.If y
ou experience an
y difficulty with
our product,
or have questions
,please call
our customer service at (201) 261-4111.
OKLAHOMA SOUND CORP .
149 Entin Road,Clifton,
NJ 07014
Tel 973-594-9000 • F
ax 973-594-9339
www .oklahom
asound.com • e-mail: inf
2
Dual Hand-Held W
irless Mic Sys
tem
7
O
KLAHOMA
S
OUND
C
ORPORATION
6
Dual Hand-Held Wirless Mic System
3
TABLE OF CONTENTS
Introduction ..............................................................2
Package Contents & Specifications ....................4
Product Features ......................................................5
Assembly Instructions ..............................................6
Operating Instructions .......................................... 7
Manufacturer’s Warranty ...................................... 8
ASSEMBLY
Before you begin using the unit:
1. Remove microphone housing from MIC A and also from
MIC B.
2. Insert 9 VOLT battery (not included) into battery cham-
ber of both mic A and mic B . Make sure to connect the
positive (+) and negative (-) prongs of battery as per
diagram within chamber.
3. Plug one adapter of cable into jack labeled "AUDIO
OUTPUT" — located on rear side of receiver unit and
plug other adapter of cable into your existing sound sys-
tem. Note: If your system does not have a 1/4" input, you
must purchase an adapter.
4. Attach included 110V prong to power cord
5. Connect the antenna labeled "A" to upside of receiver
unit on the left side and antenna labeled "B" to the
upside of receiver unit on the right side.
6. Plug power cord into outlet.
OPERATION
A.T
urn switch on micr
ophones to the on position.Switch
is located on underside of micr
ophones.
Tur
ning on
MIC A should illuminate gr
een lamp on underside of
microphone (next to switch).
Tur
ning on MIC B should
illuminate red lamp on under
side of unit (next to
switch).
B.When r
eceiver is plugged into outlet po
wer light on
receiv
er unit should illuminate.
C.When MIC
A is in operation lamp la
beled A on fr
ont
of receiv
er should illuminate.
D.
When MIC B is in operation liamp la
beled B on front
of receiv
er unit should be illuminated.
TR
OUBLESHOOTING
In ev
ent you exper
ience problems with either MIC tr
y
to replace batter
ies with new fr
esh batteries
.
If prob-
lem persists f
eel free to call our customer ser
vice at
201-261-4111.
