Oklahoma Sound GSL, Инструкция по сборке

Страница: 5 / 13

5
Assembling the unit:
Caster installation -
1) Install the two locking casters on the front tubes of panel A. Use the enclosed wrench
to tighten.
2) Install the two non - locking casters to back tubes of panel B. Use the enclosed wrench
to tighten.
Attaching Back panel to side panels -
1) Lay back panel (B) on a floor or flat surface. Take side panel (C) and align holes on
side to holes on tubes on right side of panel (B). Install by using three black 15mm
Phillips head screws from hardware packet #3.
2) Next, take side panel (D) and align holes on side to holes on left side of tube of pan-
el (B). Install by using three black 15mm Phillips head screws from hardware packet
#3.
See Diagram below.