O
KLAHOMA
S
OUND
C
ORPORATION
POWER PLUS LECTERN: Model 111PLS
4
5
ASSEMBLY INSTRUCTIONS
Assembly Tips
Assembly of the Model 111PLS is easy and should take no more than ten min-
utes. Please read all instructions before beginning assembly. We strongly rec-
ommend, to prevent damage to either yourself or the unit, that a crew of two
people be used when moving the podium on or off your work table.
Parts
(1) Reading Desk
(1) Speaker Cabinet
(2) 7" Wood Attachments
(4) 1
1
⁄
4
" Phillips Bolts
(4) 1
1
⁄
4
" Phillips Screws
(4) 2" Phillips Screws
Tools Required
Phillips-Head Screwdriver.
I. Assembling the Base
1) Gently place the speaker cabinet (speaker side down), on a dry, clean
work surface.
2) Holding the base with the floor glides towards you, line up the holes in
the base with the holes in the bottom of the speaker cabinet.
3) Starting with the upper left-hand hole, insert and hand tighten one of
the 1
1
⁄
4
" Phillips Bolts. Proceed to tighten the lower right-hand hole.
4) Insert and hand tighten the remaining two bolts. Finish tightening with
screw driver. Warning—do not over-tighten, just screw until tight and
snug.
5) Gently stand the lectern on the floor.
II. Assembling the Reading Desk
1) Take the Reading Desk, turn it over and you will see that there are four
holes. Two of them are marked with red dots. Now take the two small
pieces of wood out of the box, and you will see that they have two red
dots on one side. Next, place each piece of wood with the red dot to
face the red dot on the reading desk. Take the four 2" Phillips screws,
insert and tighten one of them. Now do the same with the remaining
three screws. Insert and tighten with screwdriver.
2) Slip Reading Desk over top of lectern. Make sure it slides all the way
down into position.
3) Secure reading Desk with the four 1
1
⁄
4
" Phillips screws provided.
Connection for Optional Battery
White cable from battery cord goes to Positive (+); Brass to Negative (-).
IMPORTANT do not reverse!
Unit Dimensions 46"H x 22"W x 17"D; Weight 60 lbs.
GOOSENECK MOUNT BASE
READING DESK
7" WOOD
2" PHILLIPS SCREWS
1-1/4" PHILLIPS SCREWS
AMPLIFIER
SPEAKER CABINET
BASE
1-1/4" PHILLIPS SCREWS