10
Rotate, D-ZOOM, GAMMA), RS485 which is very useful to connect test monitor,
DVR or keyboard to do the camera setting (Gamma ratio, Negative image effect,
Motion detection, Privacy mask and language choice). SYNC INT is only in 12V DC
power source. SYNC INT and L/L (line lock) are in 24V AC.
The key combination to enter the camera’s OSD menu with OKINA USA’s RS485
PTZ controller PTZ-KB250X is SET + 95 + PRESET and for PTZ-KB050X is
95+ENTER.
The protocol must be set to Pelco-D (not P)
For other RS485 PTZ controllers, the key combination may be different. If you have
trouble accessing the camera OSD, first check the wiring for polarity and continuity,
then please call our tech support line at (800) 872-9907 and have the model numbers
of your RS485 PTZ controller and camera available. Note that there are a lot of
different RS485 PTZ controllers in the market, so our tech support staff is limited to
only a few brands. The best option is to use OKINA USA’s RS485 PTZ controllers.
RS485 PTZ Controller Key Combination to Enter OSD Menu
1.
PTZ-KB250X
SET + 95 + PRESET
2.
PTZ-KB050X
95 + ENTER
