7
POSITION: Adjust the mask position
SIZE: Adjust the mask size
COLOR: Select mask color (0 ~ 13)
TRANS: Select mask transparency level (0 ~ 4)
MOTION: When there is movement of the subject in the screen, there will be a motion detection.
OFF / ON
↵
AREA#: Setting 3 areas(1~3) of motion detection
MODE: OFF / ON (Limit and define areas of motion detection)
SENSITIVITY: Adjust sensitivity of MD (0 ~ 20 steps) More sensitive to setting to low step with
sensitivity
POSITION: Adjust the Area position
SIZE: Adjust the Area size
INTERVAL TIME: Select the alarm interval time (0 ~ 255sec)
DWELL TIME: Select the duration time about changing MD mode (0 ~ 255sec)
SPECIAL FUNCTIONS
DEFECT: Compensates for bad pixels that may occur. Occurs when the whole screen is in full black or if there is
bad pixelation and it changes the THRS values until the screen is fixed.
SYSTEM: Select NTSC (30fps) or PAL(25fps). (NTSC / PAL)
HD FORMAT: Select Digital output 1080P or 720P. (1080P / 720P)
COMM: Set up the camera ID, baud rate, protocol
ID: Select the camera ID
1 ~ 255
BAUD RATE: Select serial communication speed
2400 / 4800 / 9600 / 19200 / 38400 / 57600 / 115200bps
PROTOCOL: Select operating protocol
VISCA / PELCO-D / PELCO-P / UPDATE
DISPLAY
DISP SEL: Select display item.
OFF / ON
↵
ID: OFF / ON
TITLE: OFF / ON
ZOOM RATIO: OFF / ON
SYSTEM MSG: OFF / ON (MD Alarm and Wait message)
SET TITLE: Select camera title menu (Text edit)
INIT SEL: Select display initial message.
OFF / ON
↵
