10
4.
PRIVACY: Mask off certain areas on the screen.
a.
OFF: Turn off function.
b.
ON:
(Fig. 6.4)
Select motion
detection functions.
i.
SELECT: Set up AREA 1 ~ 8.
ii.
DISPLAY: The location and
size of the masked area can
be adjusted.
iii.
COLOR: Select a color
masking. (1 – 6 colors)
iv.
DEFAULT: Restore to the
previous setting.
5.
LANGUAGE
(Fig. 6.1)
: Select different language.
a.
ENG, b. JPN, c.CHN1, d.CHN2
6.
DEFECT: CMOS sensor caused by heat or other
harmful frequencies on the screen. Defective
pixels (black dots or white point) to calibrate.
a.
Selected:
(Fig. 6.5)
i.
LIVE DPC: 60 steps can be
set to the regular
calibration. *Adjust the
level by set to ON, and the
LEVEL adjustment will show
up on the next line.
ii.
STATIC DPC: 60 steps can be
set up & cover the front of the lens, etc. Close the light so that
the effects of bad pixels on the entire screen section disappear.
*Adjust the level by set to ON, and the LEVEL adjustment will
show up on the next line.
iii.
SENSE-UP: select the calibration settings are available under
each step.
7.
RS485: communication camera ID can be set to 0-255. *For all the Auto ZF
Cameras the PELCO 'D' 9600bps fixed PROTOCOL is supported.
a.
Selected:
(Fig. 6.6)
i.
CAMERA ID: can be set to
0-255
ii.
ID DISPLAY: the camera ID
of 485 communications.
iii.
BAUDRATE: communication
speed of 485
communication.
8.
For all the Auto ZF Cameras with the BAUDRATE
38400 is fixed, this is because the camera's
internal communication and relationship
changes randomly, RS485 communication is not. To close Auto ZF Cameras, please
do not change the BAUDRATE.
