Okina USA SIV7-T54AI922, Руководство по эксплуатации

Страница: 7 / 8

R201110-V25 7
Model SIV7-T54AI922 SIV7-T54AI922P
TV System NTSC PAL
Image Sensor 1/3” Sony Interline Transfer Super HAD CCD
Total Pixels 768(H) x 494(V) 752(H) x 582(V)
Video Output 1.0 Vp-p Composite, 75 ohms (BNC Connector)
Resolution 540 TV Lines
Minimum Illumination
0.1 Lux @ F1.2 (30 IRE, AGC on)
0.001 Lux @ F1.2 (B/W mode, AGC on, Sense-up on)
0 Lux under infrared illumination
Lens
9.0mm~22.0mm Auto Iris Manual Vari-Focal
ED-IR Lens (ED-IR lens avoids focus shift)
Auto Iris Lens Type Accepts DC Servo Iris Lens
Filter Built-in IR Cut Filter (ICR)
Color/Mono Switching Synchronized with IR on/off
Frame Integration 4x Factory Default
IR Accuracy No Focus Shift in Nighttime
S/N Ratio Better than 50dB
Electronic Shutter
Speed
1/60~1/120,000sec 1/50~1/120,000sec
White Balance ATW (2500
o
K ~ 9200
o
K) / AWB
Auto Gain Control Auto Gain 36db
Digital Noise
Reduction
Auto
Gamma Correction 0.45
Day/Night Control On/Off Switchable
Day/Night OLPF
Switch Delay Time
5~8sec
Sense-up On(4x)/Off Switchable
Power
Consumption
90mA (AE) / 110mA (Auto Iris)
Operation
Temperature
-40°C ~ +50°C / -40°F ~ 122°F
c
NOTE 1: IR light distances are entirely dependant upon environmental site conditions and the location at which the unit is
situated. The type of camera being used is also very important.
¡
NOTE 2: Factory default for the IR LED activation level is 80%. If there is not enough IR light, adjust the VR level to maximum 100%.
Please see #17 in the Part Description section on page 1.
z
One (1) SIV7-T54AI922 or SIV7-T54AI922P Camera with video/power cable
z
One (1) Fully-Cable Managed Bracket
z
One (1) Video Output Cable Wire
z
One (1) Operational Manual
z
One (1) Main Accessories Pack
„
Three (3) Rust-proof Stainless Steel Wall Screws
„
Three (3) Rust-proof Stainless Steel Mounting Screws
„
Three (3) Stainless Steel Washers
„
Three (3) Plastic Washers
„
One (1) Allen Wrench
z
One (1) Secondary Accessories Pack
„
Three (3) Screw-on Connectors
* For any returns, please include all components listed above with original packaging in Resalable Condition. Absolutely No Returns will be
accepted if any component is missing/damaged or if any cable is cut or tampered with.
PACKAGE CONTENTS
CAMERA SPECIFICATIONS