Copyright © 2010. All Rights Reserved.
www.okinausa.com 2 REV012011-V05
PIC
T-412 T-414
Model
SET-7680 SET-7610
Image Sensor
1/3" Sony 960H Exview CCD
1/3” Sony 760H Super HAD CCD II
Number of Total Pixels
NTSC: 1028(H) x 508(V)
PAL: 1024(H) x 596(V)
NTSC: 811(H) x 508(V)
PAL: 795(H) x 596(V)
Resolution ; DSP
Color: 680 TVL, B/W: 700 TVL ; Sony Effio-E
Color: 610 TVL, B/W: 630 TVL ; Sony Effio-E
Minimum Illumination
Color: 0.03 Lux @ F1.0, B/W: 0.005 Lux @ F1.0
Color: 0.05 Lux @ F1.0, B/W: 0.01 Lux @ F1.0
Wide Dynamic Range
ATR Digital WD (ATR: Adaptive Tone-curve Reproduction) ;
128x Normal Camera (52dB)
Video Output ; Connector
1.0Vp-p Composite, 75
Ω
; BNC x2
Signal to Noise Ratio
More than 52dB (AGC off, Weight on)
Gamma Correction
0.45
IR Compatibility
Compatible with Infrared Illuminator
Menu
OSD Control
Title
TITLE (LOCATION)
Synchronizing System
INTERNAL
Digital Day&Night Mode
COLOR / B&W / AUTO
Electronic Shutter
AUTO (1/50(60)~1/100,000sec.) /
MANUAL: 1/50(60), FL 1/120(100), 1/250, 1/500, 1/1,000, 1/2,000, 1/4,000, 1/10,000sec.
Automatic Gain Control
AUTO (4 steps)
White Balance
ATW / PUSH / USER1 / USER2 / ANTI CR / MANUAL / PUSH LOCK
Back Light Compensation
HLC / BLC / OFF
Flickerless
ON / OFF
Dynamic Noise Reduction
2D
Language
ENGLISH / JAPANESE / GERMAN / FRENCH / RUSSIAN / PORTUGUESE / SPANISH /
SIMPLIFIED CHINESE
Motion Detection ; Privacy
ON / OFF (24x16 Zones, Alarm) ;
ON / OFF (8 Zones Programmable, Polygonal Mosaic)
Automatic IRIS ; Connecotr
VIDEO / DC ; D4 IRIS Jack
Lens Mount
C / CS mount (with adaptor)
Lens
Not Included
Power Input ; Consumption
12V DC / 24V AC (10.8~39V DC / 24V AC) ; 3.5W
Operation ; Storage Temp.
14
˚
F~122
˚
F ; -4
˚
F~140
˚
F / -10
˚
C~50
˚
C ; -20
˚
C~60
˚
C
Operation ; Storage Humidity
Maximum: RH80% ; RH90%
Dimensions
2.36”(W) x 1.97”(H) x 4.68”(L) / 60mm(W) x 50mm(H) x 119mm(L)
Net Weight
0.77 lbs / 350g
* Specifications are subject to change without notice.
PAL version also available.
Use
OSD Control Buttons
to operate OSD and adjust settings.
SPECIFICATION
OSD OPERATION
1.
Start to operate the OSD menu
Press the
ENTER
button to bring up the OSD main menu to start
operating OSD menus.
2.
Select items with the cursor buttons
y
Use
buttons
c
and
d
to move the cursor up and down.
y
Use
buttons
e
and
f
to switch the modes or to adjust the
parameters or the values of the settings.
3.
Switch to the sub-menu
Items with “<
┘
” symbol in the end contains sub-menus. For further
settings of those items, select the desired item with the button
c
or
d
and press the
ENTER
button to bring up the sub-menu and edit.
4.
Return to the previous page
Select RETURN and press the
ENTER
button to return to the previous
page.
5.
Exit the OSD menu
Select
EXIT
with the button
c
or
d
and press the
ENTER
button to exit
the OSD menu.
SETUP MENU
LENS
AUTO<
┘
SHUTTER/AGC AUTO<
┘
NR <
┘
WHITE BAL
ATW<
┘
ATR OFF
BACKLIGHT OFF
DAY/NIGHT AUTO<
┘
NEXT<
┘
EXIT<
┘
SAVE
ALL<
┘
