7
To access the Setup menu:
1. Press the OSD control pad (Enter) or Coaxial Control Enter button to access
the Main menu and its submenus.
2. Push the pad up, down, left and right or Coaxial Control TELE,WIDE, NEAR,
and FAR button to move between menu options.
3. Press the OSD control pad Coaxial Control Enter button to select an option.
4. When in a sub menu, select “Return to return to the previous menu.
5. To exit the Main menu, move the cursor to Exit at the bottom of the screen and
press Enter. All changes are saved.
SELECT THE LENS
In the Setup menu, go to Lens and select the type of lens used with the camera. Select
DC to adjust the lens setting manually,
1.
Brightness:
Select the Brightness level, value from 1 to 100.
2.
Iris Speed:
Select the iris speed, value from 1 and 5.
EXPOSURE
In the Setup menu, go to Exposure and press Enter, the below figure shows the different
options available:
1.
Shutter:
1/60:
Fixed value
MANUAL:
defines manual shutter value. Select a higher value to see
movement and a lower value to see clearer images. The values range from
1/60 to 1/100000.
FLK:
flicker mode avoids interference from light sources.
AUTO:
the camera sets the optimum shutter speed. User can define the
maximum shutter speed in AUTO mode. The values range from FLK to
1/100000.
DC LENS
1. BRIGHTNESS
60
2. IRIS SPEED
2
3. RETURN
RET
↵
EXPOSURE
1.SHUTTER
1/60
↵
2. AGC
MIDDLE
3. SENSUP
AUTO
↵
