NIC-ZE_rev06102008
2
Model
NIC-ZE
NIC-ZEP
TV System
NTSC
PAL
Image Sensor
1/4" Progressive CMOS Sensor
Minimum Illumination
0.5 Lux @ F2.0
Zoom
10x Digital Zoom
Electronic Shutter
1/60 ~ 1/100,000 sec
1/50 ~ 1/100,000 sec
Lens
4.0mm
System
ARM9 based 32-bit RISC CPU, 8MB Flash, 64 MB RAM
Embedded OS: Linux 2.4
Video Compression
MPEG4, Motion JPEG
Adjustable Bitrate (64Kbps to 2048Kbps), Quality and Bitrate
Video Resolution
640 x 480 (VGA)
Frame Rate
Motion JPEG: Up to 30 fps in all resolutions
MPEG4: Up to 30 fps in all resolutions
Video Streaming
Simultaneous Motion JPEG and MPEG4
Controllable frame rate and bandwidth, 3GPP/ISMA RTSP compatible
Audio
Two-way audio (full duplex), Built-in Microphone
3.5mm audio jack for external speaker
Alarm & Event
Built-in multi-window motion detection
Image upload over FTP, e-mail and HTTP
Notification over TCP and e-mail
Connectors
Ethernet RJ-45, audio line out
Processors & Memory
ARM9 based 32-bit RISC CPU
32MB RAM, 4MB Flash
Power
5V DC,max 3.5 W
Supported Protocols
TCP/IP, DHCP, PPPoE, ARP, ICMP, FTP, SMTP, DNS, NTP, UPnP, RTSP, RTP, HTTP, TCP, UDP, 3GPP/ISMA RTSP
Operating Environment
0º ~ 50 ºC (32º - 122ºF)
Humidity 20 ~ 80% RH (non-condensing)
Video Surveillance Software
Professional surveillance application for viewing, recording and archiving up to 16 cameras
Minimum System Requirements
Pentium III CPU 500 MHz or higher, or equivalent AMD 128MB RAM
Windows 98,ME,2000,XP,Vista
Internet Explorer 6 or later
Dimension
98 x 58 x 31mm
* Specifications are subject to change without notice
One (1) NIC-ZE/NIC-ZEP Camera
One (1) Mounting Bracket
Three (3) Mounting Screws
Three (3) Wall Anchors
* For any returns, please include all components listed above with original packaging in Resalable Condition. Absolutely No
Returns will be accepted if any component is missing/damaged.
Using the Software CD to configure the camera:
Power on your PC and insert the CD-ROM. The setup page should load automatically. If it does not, please select your CD-ROM
drive manually to open the setup page.
Select “Install Software”
GENERAL SPECIFICATIONS
PACKAGE CONTENTS
INSTALLATION
One (1) Power Adaptor
One (1) Software CD
One (1) Operational Manual
