5
DAY&NIGHT: Select Day&Night
MODE: AUTO / EXT-IN / DAY / NIGHT
AUTO
↵
(When using D&N and COLOR model)
POLARITY: ACTIVE LOW / HIGH
EXT-IN
↵
(When using IR-CDS model)
POLARITY: ACTIVE LOW / HIGH
*To turn on the IR, set the mode to ACTIVE LOW.
DELAY: 0 ~ 255 sec
THRS: 0 ~ 28
Day↔Night switching level in Auto Mode.
Switching in lower lux with higher threshold level.
GAP: LOW, MID-LOW, MIDDLE, MID-HIGH, HIGH
Margin between Day
→
Night switching level and Night
→
Day switching level.
ANTI-SAT: LED saturation improves. (0~20)
BURST: OFF / ON
WHITE BALANCE
AWB: Select WHITE BALANCE mode
AUTO / ONE PUSH / MANUAL / INDOOR / OUTDOOR
AUTO: Automatically adjusts color according to the available lighting.
ONE PUSH: It is a fixed white balance mode that may be automatically readjusted only by
pressing ONE PUSH
MANUAL
↵
: Color can be corrected when the user increases or decreases “RED GAIN” or “BLUE
GAIN”.
INDOOR: Set color temperature to be Indoor light (3700°K)
OUTDOOR: Set color temperature to be Outdoor light (5100°K)
RED GAIN: Adjust R gain value
0 ~ 20 steps
BLUE GAIN: Adjust B gain value
0 ~ 20 steps
CHROMA: Adjust CHROMA gain value
0 ~ 20 steps
IMAGE
HLC: Select High Light Compensation.
When extremely bright light is projected to the camera masking is used on the portion to prevent partial saturation
on the monitor.
MODE: OFF / ON / NIGHT
