DDR-08 / DDR-16 Quick Setup Guide
R201304-V10
- 5 -
2.3 Mouse Control:
REQUIRED
◆
Connection: Recommend to connect the USB mouse to the back panel.
◆
Mouse functions
：
1
）
Under LIVE mode
：
On every channel
，
you could double click the left button to switch FULL SCREEN and double click again to
switch back to original split mode.
On every channel
，
you could single click right button to popup MENU page.
2
）
Under MENU page
：
Single click left button on any functional icon could enter the function page and Single click right button to
exit function page or jump back to previous page.
If you want to key in letter or digit, please move mouse to textbox then single click left button on textbox.
The OSD keyboard will pop up as following,
3
）
Under Backup mode
：
Single click left button to select item, single click right button to jump back to previous page.
4
）
Under PTZ mode
：
Single click left button to operate PTZ function, single click right button to jump back to previous page.
1. Wizard for language and time setup
2. Wizard for Record setup
Wizard setup
Device Name: to set a name of DVR.
Language: to set a proper language.
Date Format: to set a proper display format of time.
Time Format: to set 24 hour or 12 hour format to display.
Time Zone: to set proper time zone (GMT-8: Los
Angeles)
＊
Caution: Please make sure to set time zone correctly.
To prevent getting different time stamps between local
and remote site.
System Date: to set current system date time.
Please click “next” to next wizard process.
You can setup record frame rate and quality for each
channel and change record resolution.
Adjustable parameter as following,
Resolution: CIF, HD1 or D1
Frame rate:
Number of channel.resolution@NTSC frame rate
(PAL frame rate)
4 CH
4CIF@30(25)
4HD1@30(25)
4D1@30(25)
Quality: Highest/ Higher/ Normal/ Low/ Lower/ Lowest
If you want to change all channel setup at once, please
click “All” then setup resolution, frame rate and quality at
right hand side.
Please click “next” to next wizard process.
