©2012 Car-Part.com
Loading Paper in the Microline 320
Page
2
of
4
Loading the Okidata Microline® 320
Loading Continuous Forms (Rear Feed)
The manufacturer of the Okidata 320 recommends the rear-feed path for printing reports, etc.
on single-thickness, continuous-form paper. For graphics or charts, it's best to use the single-
sheet path or top feed process.
To load the Okidata 320 for invoices or tags follow these easy steps:
Note:
If there is paper in the paper path, be sure to remove it before installing rear-feed paper.
Step 1:
Step 2:
