OKIDATA 321 Turbo, Настройки принтера

Страница: 5 / 5

4. Setting the Top of Form on the OkiData 321 Turbo
Feed a single sheet of paper into the top of the printer as if it was a form.
Hold the “Shift” button down on the front of the printer with your left hand
While holding the “Shift” button with your left hand press and hold with your right hand the “Micro
Feed Down” button. You will hear the printer clicking as it micro feeds the paper back down into
the printer. You should hold this position until it stops feeding down, then you can let go of all
buttons.
You can now press the FF/LOAD button and the piece of paper will get kicked out.
Your Top of Form is now set.