Oki S900, Руководство по обслуживанию

Страница: 48 / 65

S900
7-4
7.3 PROCEDURE FOR DISASSEMBLY AND REASSEMBLY
7.3.1 NOTES ON DISASSEMBLY
(1) Clean the disassembly and assembly location.
(2) Disconnect the power cable and remove the DC plug from the outlet before disassembly
and assembly.
(3) Follow the disassembly and assembly procedures. Never loosen the screws of parts that
must not be disassembled.
(4) Store the disassembled parts in a clean place to avoid loss.
(5) After replacement, check the contacts and spare part mounting.
(6) Assemble the parts in reverse order of disassembly procedure.
7.3.2 DOCUMENT COVER
(1). As shown in the figure below, lift the document cover to remove the studs from the hinge holes. The
studs are loosely attached to the hinge holes to cover your original when it is a few inches high.
Document cover removal
•
Note:
Before reinstalling the document cover, clean the document cover first.
Document Cover