Copyright (C) 2012 Oki Data Corporation
PT330/PT331 Printer Driver Installation Guide-1 1.0.0.1
7 of 33
3.2 Before starting the installation
When you install a driver, you must log on using an account with Administrative privileges.
If the printer drivers or associated software are already installed:
If the drivers and software for the PT330/PT331 printer are already installed on your computer,
uninstall them before proceeding.
For more information about how to uninstall, see "5. Uninstallation."
Please turn off the printer before you install the driver.
The "Found New Hardware Wizard" screen might appear even if the printer turned on power.
In that case, click "Cancel" and close the screen.
When you use the Windows driver on a LAN
To use the Windows driver on a LAN, the
"
PR-PortManager
"
print client software must be
installed.
Refer to "3.3 Installation procedures" and install
"
PR-PortManager
"
after installing the Windows
driver, and then allocate a port to the printer driver.
* For more information about how to install
"
PR-PortManager
"
, see "CHAPTER 3 USING THE
LAN CARD IN A WINDOWS 2000/XP/VISTA/7/WINDOWS SERVER 2003/2008/2008
R2/WEPOS ENVIRONMENT" in the LAN Card Online Manual.
Setup may fail if you are using anti-virus security software because the printer cannot be found.
In this case, exit setup and add
"
Quick Setup
"
,
"
AdminManager
"
, and
"
PR-PortManager
"
to the
list of exception programs in the anti-virus security software’s firewall configuration. Alternatively,
temporarily disable the firewall feature and then restart setup.
If using the Windows driver on a LAN, clear the [Enable bidirectional support] checkbox on the
[Ports] tab in the printer properties.
