- 86 -
Applicable paper
• Paper form
•
If you want to use die-cut labels, refer to the Label Printing Manual.
Paper form
Description
Continuous Paper
A roll of paper, or
paper folded along the perforations
Cut Paper
Paper cut into rectangles with a width of 25 mm to
86 mm and a length of 53 mm to 551 mm
Die-cut label
A customized label that has been die cut
• Paper Type
Paper Type
Description
Plain
High-quality paper
• Types of marks to be used as a reference when cutting paper
•
Paper without marks will be cut to the specified length.
Mark type
Description
Black mark
Mark position: Surface or back of the paper
Hole
•
Do not use the following types of paper. Otherwise poor printing may be caused or the machine may malfunction.
Paper whose end face of the roll is not cut clearly
Paper joint with tape in the middle of the roll
Paper taped or glued onto the winding core
Labels without liner or with exposed glue on the back
Paper with labels easy to peel off or peeled off
Paper with glue from the label exposed to the liner or adhering to the label surface
Paper with holes (excluding holes for cutting position detection)
Paper with cuts (excluding notches for cutting position detection)
Paper with perforations
Paper with different label sizes within one roll
Paper with different paper widths within one roll
Media of which both the liner and label are transparent
Continuous paper which is transparent
Metal foil media or conductive paper
Inkjet paper/label
Continuous labels
Paper with oozing glue on the liner
Paper with smooth surface, rough paper, and paper with different front and back roughness
Paper that is too thin or too thick, or with too much paper dust
Wet (damp) paper
Paper stuck by static electricity
Paper whose surface has been textured, embossed and coated
Содержание PRO330S
