– 26 –
5-2. Slip Paper
5-2-1. Specifications
(1) Width:
68 ~ 230 mm
(2) Length:
75 ~ 297 mm
(3) No. of copies:
or 3 copies
(4) Total thickness:
1 sheet 0.09 ~ 0.15 mm (up to A4 portrait)
0.09 ~ 0.20 mm (up to A6 portrait)
4 sheets 0.09 ~ 0.31 mm
(5) Copy slippage:
1.5 mm or less per 15 lines (between original and bottom-
most paper)
(6) Adhesive:
top-bound = good
right-bound = acceptable;
left-bound = acceptable
bottom-bound = unacceptable
Note:
Be particularly careful with paper that has adhesive on the left end because it might
feed diagonally.
Note:
1) Do not use paper that is curled, kinked, wrinkled, warped, or torn.
2) Do not use paper that has holes in the positions shown below, and do not print on the
back of paper that has low reflectance, because
it
can cause the paper sensor to
operate improperly.
3) The copying performance of the printer is greatly affected by the ambient temperature.
Therefore, print under the conditions described below.
Number of copies
Ambient temperature
Or 3 copies
10 ~ 40°C
(50 ~ 104°F)
Or 1 copy
5 ~ 45°C
(41 ~ 113°F)
37 mm
8 mm
27 mm
: Holes not allowed
: Printing not allowed on pa-
per with holes or reflectance
below 40%
Paper feed direction
Содержание PH640
Страница 1: ...User s Guide 59322301 my okidata com PH640...