Oki PAGE 18, Руководство по обслуживанию, Страница: 173 / 395

Page: 79
Service Guide OKIPAGE 18/18n
Chapter 6 Troubleshooting Procedures
6.5.1 Status Monitor Message List
Table 6-1 lists the statuses and troubles to be displayed on the status monitor in the message format.
Table 6-1
Category Status Message Status
Code Explanation Remedy
Normal status Warming Up 18 00 Warming-up status. Normal operation.
Normal status Online (Ready) 00 10 Online (ready) status. Normal operation.
Normal status Power Save Mode 00 20 Power save status. Normal operation.
Normal status Toner Low 10 00 The toner amount of the
toner cartridge is small. Normal
operation/replace
the toner cartridge.
Normal status Toner Sensor 10 01 The image drum is not
installed or the toner
sensor is faulty. Install the image
drum or replace the
toner sensor.
Normal status Change Drum 10 02 Image drum is nearing
end of life. Replace the image
drum.
Note:
Be sure
to reset the drum
counter after
replacing the image
drum).
Normal status Manual Paper In 12 20 The paper is in the
manual feed mode. Normal operation.
Normal status Printing In Progress 14 20 Printing in progress. Normal operation.
Normal status Ejection in
Progress 14 30 Ejection in progress. Normal operation.