Oki Pacemark PM4410, Руководство по установке

Страница: 5 / 72

E-3 Pacemark 4410 Setup Guide
Your OKI printer has been carefully designed to give you years of safe,
reliable performance. As with all electrical equipment, there are a few
basic precautions you should take to avoid hurting yourself or
damaging the printer:
• Read the setup and operating instructions in this manual carefully. Be
sure to save it for future reference.
• Read and follow all warning and instruction labels on the printer
itself.
• Unplug the printer before you clean it. Use only a damp cloth; do not
use liquid or aerosol cleaners.
• Place your printer on a firm, solid surface. If you put in on something
unsteady, it might fall and be damaged; if you place it on a soft
surface, such as a rug, sofa, or bed, the vents may be blocked, causing
it to overheat.
• To protect your printer from overheating, make sure no openings on
the printer are blocked. Do not put the printer on or near a heat
source, such as a radiator or heat register. If you put the printer in any
kind of enclosure, make sure it is well ventilated.
• The printhead can get quite hot when it has been printing for a length
of time. Do not touch the printhead until it has had a chance to cool
off.
• Do not use your printer near water, or spill liquid of any kind into it.
• Be certain that your power source matches the rating listed on the
back of the printer. If you are not sure, check with your dealer or with
your local power company.
• Your printer has a grounded, 3-prong plug as a safety feature, and it
will only fit into a grounded outlet. If you can not plug it in, chances
are that you have an older, non-grounded outlet; contact an electrician
to have it replaced with a grounded outlet. Do not use an adapter to
defeat the grounding.
• The printer must be installed near a power outlet which will remain
easily accessible.
Safety