manualshive.com logo in svg

Oki OL1200, Руководство по обслуживанию

Поделиться
Скачать
Oki OL1200 Скачать руководство пользователя страница 132

Page: 87

Service Guide OL1200

Chapter 5 Periodic Maintenance

 
5.2.1 Cleaning of LED Lens Array

Clean the LED lens array or replace the toner cartridge when white lines or stripes (void, light printing) are 
generated vertically down the page, as shown below.

Note: 

The LED lens array must be cleaned with an LED head cleaner. LED Lens cleaner pads are 

included with replacement toner cartridges.

(1) Set the LED head cleaner to the LED lens array as shown in the figure, then slide the cleaner back and 
forth several times to clean the head.

Note: 

Gently press the LED head cleaner onto the LED lens array.

(2) Throw the cleaner pad away.

Copyright 1997, Okidata, Division of OKI America, Inc. All rights reserved. See the OKIDATA Business 
Partner Exchange (BPX) for any updates to this material. (http://bpx.okidata.com)

Содержание OL1200

















































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды