Oki OKIPAGE4w, Руководство по обслуживанию, Страница: 63 / 139

Page: 43
Service Guide OKIPAGE4w
Chapter 3 Parts Replacement
Separator Guide
(1) Remove the upper cover assy.
(See Upper Cover Assy in this Chapter).
(2) Remove the high-voltage power supply board.
(See High-Voltage Power Supply Board in this
Chapter).
(3) Remove five screws
1
.
(4) Remove inlet
2
from base frame
3
.
Removing inlet 2
Insert a screwdriver into the hole on the side of base frame
3
, remove the inlet claw from base frame
8
,
and remove inlet
2
.
(5) Disconnect three cables
4
and connector
11
and remove base frame
3
. Then, remove screw
10
and disconnect FG cable
12
.
Disconnecting connector 11
Remove connector
11
by drawing it upward while pushing the clamp lever with a standard screwdriver.
(6) Remove the paper holder assy.
(See Paper Holder in this Chapter).
(7) Remove two engagements and sheet guide
5
.
(8) Remove friction pad
6
, compression spring
S7
, and separator guide
8
.
(9) Remove paper sensor
E9
.