Category
LCD status message
Trouble or status
Remedy
40931201TH Rev.4
120 /
Daily status
Informs that a jam occurs during paper running after exiting from the
tray.
Informs that a jam occurs after ejecting a paper. Open the cover and
remove the paper inside.
Informs that OKI HSP I/F card is under reset. It can be automatically
restored by stopping the reset.
Informs that an error (significant malfunction) occurs. The operation is
continued by pressing Recover switch.
xx: 10 I/F timeout
20 Initial error occurs 10 seconds later since powering on
21 In the event that it takes 3 seconds or more for shifting to
the operating mode, or a command for operating mode is
received during power on mode.
22 Communication error between OKI HSP-host
Informs that the upper cover is open.
Indicates that an error occurs from the results of checking ID No. of
EEPROM. The operation is continued by resetting EEPROM to factory
default after a-few-second indication.
Open the cover, remove the paper, then close the cover.
When the cover is closed, recovery printing is performed
and the error display is released.
If the error occurs frequently, see chapter 6.5.2
Open the cover, remove the paper, then close the cover,
When the cover is closed, recovery printing is performed
and the error display is released.
If the error occurs frequently, see chapter 6.5.2
Warning
Press REWCOVER key.
If the error occurs frequently, check HSP card.
Close the cover to release toe error display.
If the display does not change after the comer is closed,
check for correct operation of cover open/switch and lever.
Replace the Power Supply Unit (High Voltage).
It displays the message for a few seconds. It reset the
EEPROM to the factory default state to continue operation.
* When the program ROM is updated and the EEPROM is
replaced with new one, the menu factory default
corresponding to each destination will be loaded
PAPER FEED JAM
CHECK jjjjjj
PAPER EXIT JAM
REMOVE THE PAPER
OKI HSP I/F CARD
RESETTING
ERROR HOST I/F
OKI HSP
XX
READY
ATTENTION
READY
ATTENTION
READY
ATTENTION
READY
ATTENTION
READY
ATTENTION
READY
ATTENTION
COVER OPEN
EEPROM
RESETTING
Содержание OKIPAGE18
