English
OKIOFFICE 87
19
Windows NT4.0
Note:
Administrator’s authority is required for installation with
Windows NT4.0.
1.
Make sure that both the printer and the computer are turned OFF.
2.
Connect the fax machine and computer with a parallel interface
cable.
3.
Turn the fax machine and computer ON and allow Windows to
start.
4.
Insert Multi-Interface Kit CD-ROM into your CD-ROM drive.
5.
After the setup program has automatically started, click
[Installation of Driver and Unimessage Pro] and follow the on-
screen instructions as appropriate.
Note:
If the setup program does not automatically start or [Auto
insert notification] is turned off, click on [Start] - [Run...].
Type in D:\SETUP.EXE (where D: is the drive letter of your
CD-ROM drive) and click on [OK].
6.
During copying, [Find Fax Port] dialog appears and the fax port is
found.
7.
When [Modem Installation] dialog appears, click on [OK].
8.
When [Install New Modem] dialog appears, do the following:
Note:
If [Modems Properties] dialog appears, click [Add] and the
[Install New Modem] dialog pops up.
(a)
Check [Don't detect my modem;Iwill Select it from a list.],
and click on [Next>].
(b)
Click [Have Disk], and when [Install From Disk] dialog
appears, type D:\DRIVER\SETUP\DISK1\WINNT40
(where D: is the drive letter of your CD-ROM drive) in
[Copy manufacture's files from] and click on [OK].
(c)
When [Install New Modem] screen appears, select the
appropriate device and click on [Next>].
(d)
Check [Selected ports], then select the port displayed in
Step 6 and click on [Next>].
(e)
Click [Finish] and when [Modems Properties] dialog
appears, click on [Close].
87SGB.book Page 19 Friday, December 22, 2000 10:58 AM
Содержание OKIOFFICE 87
Страница 1: ...Setup Guide...
Страница 8: ...English viii...
