Oki OKIOFFICE 84, Руководство по обслуживанию, Страница: 94 / 481

Page: 51
Service Guide OKIOFFICE 84
Chapter 2 Installation
Service Personnel Initial Settings Table 2.9.2 (4/7)
T.F.
No. Item Specifications Default
16 T2, timeout value T2, timeout value (layer)
Registers the time duration (in seconds) for which
the receiving fax detects the EOL (End Of Line)
signal during phase C. The fax will disconnect the
line when EOL cannot be detected within T2.
* Selects the 3 digit timer 001 to 255 selectable.
(in 100ms steps)
For example: 060 x 100 ms =6 s
17 DIS bit32 Selects whether a called fax should transmit DIS
bit 32 or not.
ON : Transmits DIS bit 32.
OFF: Does not transmit DIS bit 32.
(When OFF, the following functions will
not be supported:
Reception of Extra Fine (8´15.4 line/
l
mm)
300 dpi
l
SEP/SUB frames
l
Note:
To improve compatibility between this fax
machine and other company's fax machines.
If communication error occurs frequently
when a fax sender is an older version.
18 Error criterion Registers the threshold value whether to transmit
RTN or MCF signal when the error occurs in
received data.
00% to 99% selectable. (in one percent steps)
19 Off-hook bypass Switches the function of maintaining
communication without hooking up the telephone
set in normal testing etc.
ON : Enable
OFF: Disable
20 NL equalizer Selects equalization for the following cable
lengths:
0 km/1.8 km/3.6 km/ 7.2 km selectable.
Note: Relative to 1700Hz for length of 0.4mm
diameter cable.
Equalizer level is the difference of gain of
equalized signal between 0.3kHz and
3.4kHz.