Oki OF5700, Руководство по обслуживанию

Страница: 213 / 706

Page: 100
Service Guide OKIFAX 5700/5900
Chapter 2 Installation
Service Personnel Initial Settings Table 2.9.2.3 (1/11)
T.F.
No. Item Specifications
01 Service bit Enables the serviceman to make special settings. If this setting is OFF, some
settings and report print function may become unavailable.
1) Setting values
ON: Enables the serviceman to make settings.
OFF: Disables the serviceman to make settings.
02 Monitor control Sets up the line monitor.
If this setting is OFF at the time of transmission, the line is monitored during
dialing but the line will not be monitored after a specified time lapse (about 5
sec).
If this setting is ON, the line will be monitored till the end of communication.
1) Setting values
ON: Monitored continuously
OFF: Not monitored continuously
* The tone level can be adjusted by setting Monitor Volume.
03 Country code 1) Setting values
Select a country code:
USA/INT/GBR/IRL/NOR/SWE/FIN/DEN/GER/HUN/TCH/POL/SUI/AUT/BEL/H
OL/FRE/POR/ESP/ITA/GRE/AUS/NZL/SIN/HNG/LTA/MEX
* The setting data must be transferred to the G4 board.
* Setup a dial parameter when changing a country code.
* Distinctive ring sets to OFF.
* In case Country code is changed in FRE:
Forcibly, set to 7dB when the attenuator setting
values are set between 0dB to 6dB.
Copyright 1998, Okidata, Division of OKI America, Inc. All rights reserved. See the OKIDATA Business Partner
Exchange (BPX) for any updates to this material. (http://bpx.okidata.com)