Oki OF5300, Руководство по обслуживанию

Страница: 93 / 560

Page: 37
Service Manual for OF5300/5600
Chapter 2 Installation Procedures
This table shows the initial setting items and their purposes. The default settings may differ by country.
Each item can be accessed by entering the corresponding service number on Technical Function.
Note:
S-ON: Effective if the service bit has been set to ON.
FP: Function program setting
TF: Technical function setting
T.F.
No. Item Specifications Default
01 Service bit Switching serviceman/user operation. ON : Service
personnel's features are available.
OFF : Service personnel's features are not available.
To enable or disable the following functions:
Drum (Total) and toner counter clear
Protocol dump
Dial parameters
etc.
OFF
02 Line monitor control To enable continuous monitoring of phone line for
technical troubleshooting.
FP +06 (To select the loudness of monitoring)
ON : Enable
OFF : Disable
Example:
In case of transmission mode, the monitor will be
available during dialing, but the monitor will be
switched off automatically after the elapse of specified
time (about 5 sec.). However, when TF02 is set to
ON, the monitor is available during communication
also. OFF
03 Country code Selecting the following country code: USA, INT'L,
GBR, IRL, NOR, SWE, FIN, DEN, GER, HUN, TCH,
POL, SUI, AUT, BEL, HOL, FRE, ESP, ITA, GRE,
AUS, NZL, SIN, HNG USA
04 Time and date print Enables or disables the function of printing local date
and time at the top of the received page.
OFF/ ONCE/ALL selectable.
Note:
Set at receiver.
OFF