Oki MPS730b, Руководство пользователя

Страница: 94 / 136

MPS730b User’s Guide > 94
Cannot
print. Is the READY light off?
If so, this printer is off-
line or in menu setting
mode. Check the control panel
display:
“Off-line”
Press <On Line>
Others
Press the Back Arrow button to
exit the menu setting mode.
Is there a message
displayed on the control
panel? Follow the message to rectify
the problem.
See page 102
When a parallel cable is
used for connection, are
you using a computer
that supports
bidirectional
communication? By default, the printer’s
bidirectional communication
setting is set to [Enable]. If
the computer is not
responding to bidirectional
communication, printing
cannot be done.
Turn the bidirectional
communication setting to
[Disable] on the control panel
and then print again.
The printer has
insufficient memory to
print the job. If the printer driver is set to
[1200dpi] on the [Graphics]
tab, change it to [600dpi].
Install additional memory
(optional) in the printer.
Reduce the complexity of the
print job.
Print job is
sent, but
the R
EADY
light is not
on.
The interface cable may
be disconnected. Turn off the power and check
the connection of the interface
cable.
Is the interface
configured? Check the port status of the
interface.
The computer
environment is not
correctly set up. Check the computer
environment, such as the
printer driver.
Symptom Explanation Action