Oki MPS480mb, Руководство пользователя

Страница: 70 / 176

70 • Access Control
Access Control ___________________
The operation and functionality of this machine can be limited to authorized
personnel only by the simple introduction of a 4 to 9 digit PIN (Personal
Identification Number). This is known as Access Control. The greater the number
of digits in the PIN - the more secure it is.
Your MFP supports the following PIN types:
• Administrator PIN; This is the PIN for the system administrator(s).
If a PIN is registered as an administrator, the Admin password entry screen is
displayed, and when an Admin password is entered, it will be authenticated as
an administrator.
• User PIN; This is PIN for general users.
If a PIN is registered as a general user, the function selection screen is
displayed, also after PIN entry, the function selection screen is displayed.
After using the machine, you will be expected to log out. Leaving the machine in
access control mode will render the machine not usable by unauthorised users.
Enabling Access Control
Access Control Enable/Disable is switched in Menu > Admin Setup > System Setup
> Access Control.
If your administrator has enabled access control on your machine, it will
automatically start up in access control mode. You will not be able to use it until
you have provided valid login information.
With Access Control set to enable, the display reverts to the System Setup screen
immediately following the setting change. If one of the functions such as Print, Fax
Send or PC Scan is running, the display will only revert to the System Setup screen
when the task has been completed.
Logging in
1. If the Enter PIN screen is displayed, use the keypad to enter your PIN.
2. Press Enter (or the Start button) to confirm.
3. At the Enter Password screen, use the on-screen keypad to enter your
password.
Note
A valid PIN consists of 4 to 9 digits.
Numbers entered are not displayed on-screen, they are replaced by
“*”.
If the PIN entered in invalid, “Incorrect Password” is dispalyed for 3
seconds and the display reverts to the Enter the PIN screen.