manualshive.com logo in svg

Oki ML3410, Руководство пользователя, Страница: 35 / 78

Поделиться
Скачать
Oki ML3410 Скачать руководство пользователя страница 35

Making Selections

                                                                                                                                                
Making Selections

Before you begin, press the PRINT button to get a list of groups, items, and settings. This list will 

tell you what the current settings are for your printer. Use this list to find your way around in the 
menu.

Each time you press the GROUP, ITEM, or SET button, the appropriate menu line will print on the 

paper.

Press the GROUP button to move from group to group. If you pass the group that you want, just 

keep cycling through. It will come up again. Press the ITEM button to move between the items in 
a group.

Press the SET button to cycle through the settings for an item. To choose a setting, press the SET 

button until you come to the setting you want then press the ITEM button to move on to the next 
item.

Press the EXIT button to save your changes and leave the menu.

See Appendix A for a list of the menu items and factory settings (

).

Note

To reset the printer to the factory menu settings, turn the printer off, then hold down the SELECT 
and LINE FEED buttons while you turn it back on.

To reset both the menu and the paper loading position, turn the printer off, then hold down the 
SELECT and TOP OF FORM buttons while you turn it back on.

                                                                                                                                                

ML3410 ( 96-02-07 )

Содержание ML3410















































































Отзывы:

Нет отзывов