2
1 Unpack your machine.
!
Keep your packing materials and carton in case you ever
need to ship or transport the unit.
2 Remove the shipping restraints and tape.
32T-17.eps, 32T-16.eps, 32T-07A.eps and arrows.eps
QUIET
PARK
TEAR
FF/LOAD
LF
SEL
SEL
POWER
ALARM
MENU
GROUP
EXIT
ITEM
SET
MENU
SHIFT
TOF
Micro Fee
d
Up
Micro Fe
ed
Down
PRINT QUALITY
CHARACTER PITCH
HSD
NLQ
UTL
SSD
10
12
15
17
20
PROP
QUIET
PARK
TEAR
FF/LOAD
LF
MENU
UP
ITEM
SET
TOF
Micro Feed
Up
cro Fee
d
own
PRINT QUALITY
CHARACTER PITCH
HSD
NLQ
UTL
SSD
10
12
15
17
20
PROP
3 Install the ribbon.
4 Install any accessories you purchased. Refer to the
instructions provided with each accessory.
5 Connect to the power outlet.
Paper Loading
!
To load single sheets, see your Printer User’s Guide,
“Installation, Paper Loading.”
To load bottom-feed paper, see the instructions provided
with the pull/push tractors.
To load rear-feed, continuous-forms paper:
1 Grasp the tabs and lift off the paper separator.
32T-23A.eps
1 Physical Setup
2 Load the paper on the tractors. Install the paper separator.
32T-29.eps and 32T-23A.eps
3 Place the wire guide (1) on the pull-up roller assembly (2).
Then, press FF/LOAD.
32T-31.eps
Testing the Printer
Run the Font Sample Test to make sure your printer is operating
properly.
!
Wide Carriage Model
Microline 321 Turbo/n
If you are using 8.5 inch paper to run the test, make sure
the paper width selection in the printer menu is set to 8.5
inches. Otherwise, printing on the platen may damage the
printer. Refer to the Printer User’s Guide, “Using Your
Printer, Menu Mode, Explanations of Menu Items.”
To run the test:
•
Turn the printer off, then press and hold the LF key while
turning the printer back on.
To stop the test before it is finished:
•
Press SEL.
1
2
