OKI
ML2502 Demo Board
10
3. Repeating Playback Operation
(1)
To repeat playback of the same phrase, keep on inputting “H” level to the PLAY1
or PLAY2 pin. “H” level input to the PLAY1 or PLAY2 causes the LSI to power
up and start playback.
(2)
The LSI automatically restarts playback when the last address of the phrase has
been reached.
(3)
When the playback reaches to the last address of the phrase, with the PLAY1 or
PLAY2 pin being held “L” level, the LSI automatically ends playback.
(4)
The LSI automatically powers down after playback ends.
(5)
To stop playback before repetitive playback session ends, bring the PLAY1 or
PLAY2 pin down to “L” level once, and then re-input a “H” pulse to the PLAY1 or
PLAY2 pin. The LSI automatically shifts to low-power consumption mode after
playback stops.
Figure 3.1 Timing Chart for Repetitive Playback Operation
Start Pulse
Stop Pulse
Power Down Powering Up
Playing Back
Power Down
Powering Down
MON
PLAY2
PLAY1
Status
Interval
Playing Back
End Playing
Resume Plaing
