Oki ML1120, Техническое справочное руководство

Страница: 243 / 254

Technical Reference Guide – Appendix D – Media specifications > 243
Combinations
The following table shows usable combinations of paper weights
for multipart forms. In each combination, its base (last) part is
equal to or more than the other part(s) in weight. Weights not
within the ranges given in the table impair paper feed accuracy
and do not carry assurances.
NOTE
Weights shown parenthesised, although usable, impair paper
feed accuracy and are not assured.
B
INDING HOLES
For paper with binding holes, see “Binding holes” on page 235 .
P
ERFORATIONS
The use of paper that contains out-of-specification perforations is
not assured. (If any problems occur with the use of such paper,
equipment or performance is not assured.)
When paper with such perforations is used in cases of absolute
necessity, adequate prior testing must be performed to check
that problems do not occur. Some precautions for using paper
with perforations outside the assurance range are as follows:
> The specifications for perforations conform to those
defined in
“Perforation dimensions” on page 226 .
MAX.
NO. OF
FORM
PARTS 2 PT 3 PT 4 PT 5 PT
1st part 43–55 kg
(34 kg)
43–55 kg
(34 kg)
43–55 kg
(34 kg)
43–55 kg
(34 kg)
2nd part 43–70 kg
(34 kg)
34 kg 34 kg 34 kg
3rd part 43–55 kg
(34 kg)
34 kg 34 kg
4th part 43–55 kg
(34 kg)
34 kg
5th part 43–55 kg
(34 kg)