manualshive.com logo in svg

Oki Microline 320 Turbo D1, Руководство пользователя

Поделиться
Скачать
Oki Microline 320 Turbo D1 Скачать руководство пользователя страница 28

ML320/321 Turbo Printer Handbook

21

Switching Paper Paths

To switch from continuous-form feed from the rear or bottom (optional push or pull
tractor installed) of the printer to single-sheet feed from the top:

1. Tear off printed pages.

2. Press PARK button.

3. Swing wire guide up into paper separator, then pivot separator to upright posi-

tion.

4. Move paper lever to position marked “TOP”.

5. Load single sheet paper into paper separator.

To switch from top feed to continuous-form tear or bottom (optional push or pull
tractor installed) feed:

1. Make sure no sheet is in paper path (press FF/LOAD to remove single sheet from

path).

2. Lower paper separator to continuous forms position and swing wire guide over

onto pull-up roller assembly.

3. Move paper lever to position marked “REAR” or “BOT”, as appropriate.

4. Press FF/LOAD button. Continuous-form paper will advance into print position.

Содержание Microline 320 Turbo D1
























































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды