Basic Settings for Faxing
- 59 -
Se
tup
1
Basic Settings for Faxing
This section explains basic settings for faxing. Be sure to configure the following settings before you
transmit faxes.
Connecting a Telephone Line
Depending on your environment, a method to
connect a telephone line is different. Based on
the following figures, connect the line for your
environment.
Note
You can not connect to the ISDN line directly. To connect to
it, use the terminal adopter (TA) and connect to the LINE
connection of the machine.
Connecting to the public line
(Connecting for Fax Only)
1
Plug one end of the supplied telephone
cable (1) into the LINE connection (2) of
your machine and the other end into a
public line (analog).
Connecting to the public line
(Connecting for Fax and Telephone)
1
Plug one end of the supplied telephone
cable (1) into the LINE connection (2) of
your machine and the other end into a
public line (analog).
2
Remove the telephone connector cover.
3
Plug the external telephone's cable into
the TEL connection (3) of your machine.
2
1
Public Line
(Analog)
2
1
Public Line
(Analog)
3
