Oki MB492dn, Руководство пользователя

Страница: 653 / 1228

Easy Setup
In [Easy Setup], you can change the settings of date/time, fax, network, e-mail function by using [Device Settings] on the operator
panel.
1.
Press [Device Settings] on the touch panel.
2.
Press [Easy Setup].
3.
Enter the administrator password.
The factory default password is "aaaaaa".
4.
Press [OK].
5.
Select an item, and then change the setting.
When the setting is complete, the setting completion screen is displayed.
6.
Press [Close] to complete the setup.
Item Description
Date/Time
Setting
Time Zone Sets the GMT time zone.
Daylight Saving Sets daylight saving to ON or OFF.
Server SNTP Server
(Primary)
Sets the SNTP server to use for setting the current date and time. You can enter up to
64 characters.
SNTP Server
(Secondary)
Manual Date Sets the current date and time manually.
Time
Fax Setting Fax Number Sets the fax number of this machine. You can enter up to 40 digits.
Sender ID Sets the sender's information. You can enter up to 22 characters.
Network
Setting
IP Address Sets the IP address. You can enter up to 15 characters.
Subnet Mask Sets the subnet mask. You can enter up to 15 characters.
Default Gateway Sets the gateway address. You can enter up to 15 characters.
DNS Server (Primary) Sets the IP address for a Primary DNS server. You can enter up to 15 characters.
DNS Server (Secondary) Sets the IP address for a Secondary DNS server. You can enter up to 15 characters.
WINS Server (Primary) Sets the name or the IP address for the WINS server. You can enter up to
15 characters.
WINS Server (Secondary) Sets the name or the IP address for the WINS server. You can enter up to
15 characters.
E-mail Setting Mail Server Address Sets the IP address or host name for the SMTP server. You can enter up to
64 characters.
Set Sender's Address (from) Sets an e-mail address for this machine.
Receive Setting Sets the protocol to be used for receiving e-mails.
Authentication Method Sets the authentication method.
SMTP User ID Sets the login ID to the server used for SMTP authentication. You can enter up to
64 characters.
SMTP Password Sets the password to the server used for SMTP authentication. You can enter up to
64 characters.
POP3 Server Sets the IP address or host name for the POP3 server. You can enter up to
64 characters.
POP User ID Sets the login ID to the server used for POP authentication. You can enter up to
64 characters.
POP Password Sets the password to the server used for POP authentication. You can enter up to
16 characters.
652