Installing Your Machine
- 20 -
Turning On Your Machine
1
Plug the AC cable into the AC power
socket of your machine.
2
Plug the AC cable into the electric socket.
3
Check that no documents are on the document
glass or ADF, and the ADF cover is closed.
4
Hold down the power switch for about a
second to turn on the power.
The copy standby screen is displayed after
your machine enters ready status.
Note
Turn the power off, and when turning the power back on
again, push the power switch after waiting for a few seconds.
Turning Off Your Machine
Be sure to follow the procedure below every time
you turn off the machine.
1
Hold down the power switch for about a
second.
The message [
Shutdown in progress.
Please wait. The machine turns off
automatically.
] appears in the operator
panel, and power switch indicator blinks
every 1 second. Then the machine turns
off automatically and power switch
indicator goes out.
Note
Turn the power off, and when turning the power back on
again, push the power switch after waiting for a few seconds.
When the machine is not used for
long time
When the machine is not used for long time due
to holidays or trips, pull the power cord from the
socket.
Memo
The machine does not have functional failures if removing
the power plug for long time (more than 4 weeks).
Power Save Mode and Sleep Mode
The two-phase power saving mode enables you
to reduce machine power consumption.
Power Save Mode
When your machine is not used for a certain
period of time, it automatically enters a power
saving mode to reduce power consumption.
You can enter the power saving mode manually
by pressing the <
POWER SAVE
> key on the
operator panel.
