Oki LD630 Series, Техническое описание

Страница: 48 / 52

LD630/LD640
- 48 -
- Port
Check whether the port configured in the printer and the host (PC,
PDA) are the same.
- Authentication / Encryption
Check the authentication/encryption setting status.
Check whether the settings of the printer and the AP (wireless
terminals) are the same.
PING Check
Checking IP collision
- When entering IP address manually without using DHCP, you must
check whether the corresponding IP address is used by other
equipment. The printer may not work normally when there is a
collision in the IP address.
- When the printer is turned off, carry out the Ping Test to the printer IP.
Ping TEST
- Turn off the printer.
-
Select “Run” from the Windows Start menu, and then enter “cmd”.
-
Enter “ARP –d” and delete ARP table.
-
Enter “ping {printer IP}”.
- ARP
–d, ping {IP address}
When you see “Request timed out.” as shown below, it means that there is no collision.
The corresponding IP can be used.