Oki ES9466, Руководство пользователя

Страница: 19 / 52

1.LOADING PAPER
Loading Paper in Trays 19
LO
AD
ING PA
PER

Large Capacity Feeder
1
Pull out the tray of the Large Capacity Feeder carefully until it comes to a stop.
Do not touch the slide rail (“A” in the figure on the right).
This could injure you.
2 Place 2 stacks of paper in the right and left trays correspondingly.
Fan and jog the paper well before placing it. Place it with its copy side up. Place one stack of paper in the right-
hand tray (shown as “A” in the figure) with its side touching the right corner of the tray, and place the other stack
of paper in the left-hand tray (shown as “B” in the figure) with its side touching the left corner of the tray. Paper
can be placed neatly if you divide stacks into small bundles and pile them up on the two trays alternately.

Paper in the right-hand tray is used first. When it runs out, paper in the left-hand tray will be moved
automatically to the right-hand tray and fed.

Be careful that the stack height of the paper does not exceed the line indicated inside the side guides. For
maximum number of sheets to be loaded, refer to the
Specifications Guide .

When placing paper, be sure that the center lever is not open. (See the label attached in the tray of the Large
Capacity Feeder.)

If paper cannot be fed, printing takes a long time after feeding or the quality is poor, turn over the paper and
place it again.
3
Push the tray of the Large Capacity Feeder straight into this equipment carefully.
When the tray is completely inserted, the right-hand tray will move up to the paper feeding position.
Be careful not to let your fingers be caught when pushing the tray into this equipment.
This could injure you.
4
Change the paper type as required.

P.23 “Setting paper type”
A
A
B