Safety Information 13
Large Capacity Feeder
Before moving the equipment with the Desk installed, remove the front stabilizer. Be sure to reinstall it
after the equipment has been moved.
Do not install the equipment by yourself or try to move it once it has been installed. This could result in
an injury or damage to the device. Contact your service representative if the equipment needs to be
installed or moved.
Other points
If there is insufficient space around the equipment, the poor ventilation will result in malfunction,
also some operations such as feeding from MPT and releasing paper jams may become difficult. To
ensure adequate space, follow the table below as a guide.
Be sure to fix the power cable securely so that no one trips over it.
Adverse environmental conditions may affect the safe operation and performance of the
Multifunctional Digital Systems, and the Multifunctional Digital Systems could break down.
- Avoid locations near windows or with exposure to direct sunlight.
- Avoid locations with drastic temperature fluctuations.
- Avoid too much dust.
Removing the stabilizer
Installing the stabilizer
Adequate space
Rear
Left
Right
20 cm (7.9")
30 cm (11.8")
80 cm (31.5")
