Oki ES9455, Руководство по установке программного обеспечения

Страница: 209 / 386

8.[Administration] Tab Page
[Setup] Item List 207
8 [Administration] Tab Page
‰ Setting up Raw Job Setting
In Raw Job Setting, you can add up to 16 LPR queue names and specify the raw job setting for each queue. These queue
names can be used when printing without a printer driver, such as printing from UNIX workstation.
This setting is available only for some models.
[Add New LPR Queue]/[Edit] screen
1
2
3
4
Item name Description
1 [Add] button Select this to add a LPR queue.
P.207 “[Add New LPR Queue]/[Edit] screen”
2 [Edit] button Select this to edit the LPR queue selected in the LPR queue list.
P.207 “[Add New LPR Queue]/[Edit] screen”
3 [Delete] button Select this to delete the LPR queue selected in the LPR queue list.
4 LPR queue list Select this to display the list of registered LPR queues.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
Item name Description
1 Queue Name Enter the queue name with up to 31 alphanumerical characters. The queue name is case
sensitive so that "Queue1" and "queue1" will be added as different queues.
2 Duplex Printing Select whether a raw job will be printed on both sides of the paper.
3 Paper Size Select the default paper size that applies to a raw job.
4 Paper Type Select the default paper type that applies to a raw job.
5 Orientation Select the default orientation that applies to a raw job.
6 Stapling Select whether a raw job will be stapled.
7 Output Tray Select the default output tray that applies to a raw job. A banner page that is created by
NetWare and Windows operating systems also will be outputted to the tray set here.
8 PCL Form Line Enter the number of lines printed per page.