Appendix A - menu system > 134
Fax Setup
a
(cont.)
Security
Function
ID Check Tx
ON,
OFF
Check and match the
last four digits of the
destination fax
numbers with those
registered in the
target. If ON, the MFP
will send only when
they match.
Broadcast Destination
ON
, OFF
Fax number
confirmation screen
displays before
sending the fax.
Confirm Dial
ON,
OFF
When ON, you will be
asked to re-enter the
destination fax number.
The fax will only be
sent when the two
numbers match.
Other
Settings
Redial Tries
0 ~
2
~ 9
time(s)
Set the number of
redial attempts.
Range: 0 - 9 time(s)
Redial Interval
1
~ 5 minute(s)
Set the time between
redial attempts.
Range: 1 - 5 minute(s)
Ring Response
1 Ring
, 5 seconds,
10 seconds,
15 seconds,
20 seconds
Enter the number of
rings required before
receiving an incoming
fax.
Dialling Pause Duration
0 ~
2
~ 10
second(s)
Enter the pause
duration required.
Range: 0 - 10 second(s)
Rx Reduc. Rate
Auto
, 100%
Select the Rx
reduction rate.
Reduc. Margin
0 ~
24
~ 100 mm
Select the reduction
margin.
Range: 0 - 100 mm
ECM Mode
ON
, OFF
Error correction mode
(ECM) automatically
detects and corrects
errors in the fax
transmission process that
are sometimes caused by
telephone line noise.
Prefix
user defined
Enter the require
dialling prefix (if you are
connected via a PBX
then you need to enter
a prefix to obtain an
outside line connection).
Received Time Stamp
ON,
OFF
Set to ON if you want
the time stamp printed
on incoming faxes.
Print Check Message
ON
, OFF
If enabled, when a
transmission error
occurs the error
content is reported.
ITEM
OPTION
VALUE/DESCRIPTION
