1 Setting up Network Server
12 Setting up NetWare Print Server
13
Click the [Object] menu and select [Create].
y
The New Object dialog box appears.
14
In the Class of new object list, select “Print Server” and click [OK].
y
The Create Print Server dialog box appears.
15
Enter the print server name, check the “Define additional proper-
ties” option and click [Create].
y
The print server name must be “MFP_[NIC Serial Number]”. You can find the Unit
Serial Number of the equipment on the NIC Configuration list can be printed from the
control panel.
16
Display the Assignments window and click [Add].
y
The Select Object dialog box appears.
17
Select a created printer and click [OK].
18
Click [OK] to close Assignments window for the print server.
y
The print server is created.
Setting up the NetWare in NDPS Mode
This equipment supports printing over NetWare 5.1/6.0/6.5 networks running either the TCP/IP
protocols or the IPX protocol. For pure IP printing, this equipment takes advantage of features in
NDPS (Novell Distributed Print Services).
An administrator can use Novell Printer Gateway to set up the NetWare server in NDPS mode.
P.12 “Setting up NDPS Using Novell Printer Gateway”
Setting up a NetWare environment correctly requires the presence and active cooperation of the
Novell network administrator. You must have administrator privileges on the network to create
new NDPS objects.
Setting up NDPS Using Novell Printer Gateway
NDPS is not like the earlier queue-based versions of NetWare printing. Instead, you use an
NDPS Manager and a Printer Agent, which control the tasks previously handled by a print
queue, print server, and spooler. You can also make the printer driver available for clients to
download from Windows client computers.
Before configuring the NetWare file server in NDPS mode, please confirm followings:
y
For NetWare 5.1, the Support Pack 8 and Novell Gateway version 2.1.6 or later with
ndps3sp2c are installed.
y
For NetWare 6.5, the Support Pack 5 and Novell Gateway version 3.00 or later with
ndps3sp2c are installed.
y
Make sure you have a valid IP address for this equipment and for any computers that will
print to it (when used in the TCP/IP network).
y
In the equipment setup, enable TCP/IP and enter the IP address, Subnet mask, and Gate-
way address for this equipment (when used in the TCP/IP network).
Содержание CX 1145 MFP
Страница 1: ...Network Administration Guide CX1145 MFP 59315601 Rev 1 0...
Страница 29: ......
