manualshive.com logo in svg

Oki C9600dn, Руководство по настройке, Страница: 209 / 259

Поделиться
Скачать
Oki C9600dn Скачать руководство пользователя страница 209

Troubleshooting: TCP/IP • 209

Troubleshooting:
TCP/IP

Printer cannot find the network interface card.

•

Turn the printer off and on again.

•

Confirm that the network interface is enabled on the printer.

•

Make sure there is a response to the interface card command.

•

Make sure the network cable is correctly connected. 

•

Change the cable and try again.

•

Run the Self-diagnostic test (with printer on, press and hold the 
Test button on the print server for 3 seconds, then release it). 

•

Make sure that the IP Address, Subnet Mask and Gateway are 
correct. 

•

Make sure that the TCP/IP protocol is set to Enable.

•

Reset the network interface card to the factory default settings.

•

If DHCP, BOOTP and RARP are not used, ensure they have been 
set to Disable.

Cannot print with lpr and ftp.

•

Turn the printer off and on again.

•

Make sure there is a response to the ping command.

•

Make sure the network cable is correctly connected. 

•

Change the cable and try again.

•

Make sure the host name and IP address are configured in the 
workstation.

•

Make sure the printer port name is configured in the workstation.

•

There are three port names: lp, euc and sjis. Use lp by default as 
euc and sjis are specific to printers with PostScript available. 

Содержание C9600dn




































































































































































































































































Отзывы:

Нет отзывов