Oki C931dn, Руководство пользователя

Страница: 75 / 147

- 75 -
Connecting the PC
Appendix
Printing
3
Setting Up
2
B
efore use
1
Basic D
evice Oper
ations
4
Index
„
Setup Flow
The setup procedure may differ depending on
the print method.
EtherTalk
Bonjour/
Rendezvous
Turning ON the power
supply
Turning ON the power
supply
Enabling the device
EtherTalk
Disabling device sleep
mode
Turning ON the PC power
supply
Turning ON the PC power
supply
Setting EtherTalk in the
PC
Installing the printer
drivers
Installing the printer
drivers
Adding devices to the PC Adding devices to the PC
Go to “Using EtherTalk” . Go to “Using Bonjour
(Rendezvous)” (P.78) .
Note
⿟ Upgrading the Mac OS X or printer driver version may
result in differences from the description in the manual.
⿟ Disable all anti-virus software before starting the setup.
„
Using EtherTalk
‰
Enable EtherTalk using the control panel,
and disable sleep mode
If connecting to a network using EtherTalk, it
is necessary to enable EtherTalk in the printer,
and disable sleep mode. Next, install the printer
drivers in the computer.
Reference
⿟ People using Bonjour go to “Using Bonjour (Rendezvous)”
(P.78) .
1
Press either the scroll button or
on the control panel to display the
"Functions" screen.
2
Press the scroll button several times
to select [Admin Setup], and then press
the [OK] button.
3
Use the 10-key pad to enter the
administrator password.
The default factory-set password is
"aaaaaa". Press the [OK] button after
entering each individual character.
4
Press the [OK] button.