manualshive.com logo in svg

Oki C9300 Series, Руководство по обслуживанию

Поделиться
Скачать
Oki C9300 Series Скачать руководство пользователя страница 134

41956001TH  Rev.1

134 /

Oki  Data  CONFIDENTIAL

Table 6-1-1  Operator Alarms (5/6)

Message

Cause

Error Description

Solutions

Close cover
310: Top
cover open

Reset fuser
320: Fuser
error

Turn power
OFF and wait
321: MOTOR
OVERHEAT

Open/close
cover
323: Paper
thickness
error

Open/close
cover
324: Paper
thickness
error

Open/close
cover
325: Paper
thickness
error

Open/close
cover
326: Paper
thickness
error

Reset belt
330: Belt error

Reset drum
340~343:
Drum error

Set new drum
350: Yellow drum
life
351: Magenta
drum life
352: Cyan drum
life
353: Black drum
life

Set new fuser
354: Fuser life

Set new belt
355: Belt life

Set new belt
356: Belt life

Set duplex unit
360: Duplex
unit is open.

Printer engine cover
open.

Same unit not detected
upon power ON or
opening cover.

Printer cannot be used
temporarily due to
motor overheat.

Sensor output out of
range with no media.
(Only for Factory Mode)

Sensor output gap out
of range with no media.
(Only for Factory Mode)

Media detect value out
of range.

U-Heavy mode media 
detect value out of 
range.

Same unit not detected
upon power ON or
closing cover.

Same as above.

ID unit life.

Fuser life (occurs when
fuser life continuation
is OFF).

Belt life notified (alarm).
Print N-count by
opening and closing
cover.

Waste toner belt life
notified (alarm).
Print N-count by
opening and closing
cover. N=20

When duplex unit is
removed from printer.

1) Check if top cover is open.
2) Check if cover switch is proper.

1) Is error message displayed?
2) Is fuser unit set properly?
3) Does error reoccur?

1) Are foreign objects mixed in sensor?
2) Does printer recover when detecting
    paper thickness by opening/closing tray?
3) Does printer recover by power OFF/ON.

1) Are foreign objects mixed in sensor?
2) Does printer recover when detecting
    paper thickness by opening/closing tray?
3) Does printer recover by power OFF/ON.

1) Is different media type mixed in?
2) Is media being double fed?

Is different media type mixed in?

1) Is error message displayed?
2) Is belt unit set properly?
3) Does error reoccur?

1) Is error message displayed?
2) Is image drum set properly?
3) Does error reoccur?

Right after replacing ID unit?

Right after replacing fuser?

Right after replacing belt?

Right after replacing belt?

Does error recover by resetting duplex
unit?

Yes
Yes

No

Yes

No

Yes

Yes

No

Yes

No

Yes

Yes

Yes

No

Yes

Yes

No

Yes

Yes

No

Yes

No

Yes

No

Yes

No

Yes

No

Close top cover.
Close side cover.
Replace cover switch.

Check if fuser is set properly.
Reset fuser and turn ON power again.
Replace fuser unit assembly.

Turn ON power after a while.

Remove foreign objects.
Normal.

Remove foreign objects.
Normal.

Remove foreign objects.

Remove foreign objects.

Check set condition of belt unit.
Reset belt unit and turn power ON
again.
Replace belt unit assembly.

Check set condition of ID.
Turn power ON again.
Replace ID unit assembly.

Check ID unit life.
Replace ID unit.

Check fuser life.
Replace fuser.

Check belt life.
Replace belt.

Check belt life.
Replace belt.

Normal.
Replace duplex unit or engine board.

Содержание C9300 Series





























































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды