Oki C831n, Руководство пользователя, Страница: 134 / 150

- 134 -
Changing Network Settings From the Web Page
5
5.
Network Settings
10
Click [ Submit ].
The setting procedure for a certificate issued by a
certificate authority is finished.
Enabling Encryption
After creating a certificate, perform the following
procedure to enable encryption.
When you change the settings from the web
page to enable encryption, communication is
encrypted immediately after that change has
been made.
1
Perform “Creating a Certificate” P.133
steps 1 to 3 to enter the encryption
screen.
2
Select [ Enable ] for the desired protocol
on which encryption is applied.
3
Click [ Encryption Strength Settings ].
4
Select the encryption strength and click
[ OK ].
5
Click [ Submit ].
Opening the Web Page
Memo
● Ensure to enable the protocol on which encryption is
applied in “Enabling Encryption” P.134 .
1
Launch a web browser.
2
Enter “https://your printer’s IP address”
in the URL address bar and then press
the < Enter > key.
IPP Printing
IPP printing allows you to transmit your print job
data from your computer to the printer via the
Internet.
„
Enabling IPP Printing
IPP printing is disabled by factory default. To
perform IPP printing, enable IPP first.
1
Access the printer’s web page and log in
as the administrator.
2
Select [ Admin Setup ].
3
Select [ Network Setup ] > [ IPP ] >
[ Settings ].
4
Select [ Enable ] in [ IPP ].
5
Click [ Submit ].
„
Setting Up Your Printer As an IPP
Printer (for Windows Only)
Add the printer to your computer as an IPP
printer.
1
Click [ Start ] and select [ Devices and
Printers ] > [ Add a printer ].
2
On the [ Add Printer ] wizard, select
[ Add a network, wireless or
Bluetooth printer ].
3
In the list of available printers, select
[ The printer that I want isn’t listed ].
4
Select [ Select a shared printer by
name ].
5
Enter “http://your printer’s IP address/
ipp” or “http://your printer’s IP address/
ipp/lp” and then click [ Next ].
6
Click [ Have Disk ].
7
Insert the software DVD-ROM into the
computer.
8
Enter the following value in
[ Copy from ], and then click [ Use ].
- For PCL driver, “D:\Drivers\EN\PCL”.
- For PS driver, “D:\Drivers\EN\PS”.
- For XPS driver, “D:\Drivers\EN\XPS”.
Memo
● In the above examples, the DVD-ROM drive is setup
as the D drive.
9
Select the NFL file and click [ Open ].
10
Click [ OK ].
11
Select a model and click [ OK ].
12
Click [ Next ].
13
Click [ Finish ].
14
Print the test page after installation is
complete.