Oki C810 Скачать руководство пользователя страница 80

Страница: 80 / 95

Installing upgrades > 80

ARD

DISK

DRIVE

(C830

ONLY

)

The optional internal hard disk drive (HDD) enables collating of printed pages and can be

used to store overlays and macros, fonts, and secure or proof documents waiting to be

printed.
Installation takes a few minutes, and requires a medium size cross-head (philips type)

screwdriver.

Switch the printer off and disconnect the AC power cable.

Press the cover release and open the printer’s top cover fully.

Pull down the MP Tray using the depressions (b). Lift the front cover release lever

and lower the front cover.

Remove the screw (a) securing the right-hand side cover.

Lift the edge of the side cover slightly and pull the cover away from the printer at the

top. Lift the cover slightly to detach it from the printer. Place it safely to one side.

WARNING!

If the printer has been powered on recently, the fuser will be hot.

This area is clearly labelled. Do not touch.

Содержание C810
































































































Результаты поиска

Содержание C810

Отзывы:

Oki C810, Руководство пользователя, Страница: 80 / 95

Результаты поиска

Содержание C810

Отзывы: